Specialty metals

Specifying UNS N04400 nickel-copper alloy by product form and condition, with producer-specific properties and corrosion-service limits.

Designation, condition-dependent properties and service qualification for nickel-chromium-iron Alloy 600, UNS N06600.

Nickel-alloy 625 selection by designation, product form, heat treatment and exposure conditions.

Specifying UNS N07718 by producer, form and heat-treatment condition, with bounded wrought-property and additive-manufacturing examples.

Specifying UNS N10276 by producer, form and condition, with bounded mechanical data, corrosion-test examples and fabrication requirements.

Form- and temper-specific selection of AZ31B magnesium, with rolled-product examples, forming, joining, surface protection and machining controls.

Selecting AZ91D by casting route, condition, test basis, corrosion protection and machining controls.

Selecting nodular iron by grade, matrix, casting route and test basis, with bounded continuous-cast bar examples and finished-casting acceptance requirements.

Commercially pure Grade 2 titanium: designation, product-specific strength, corrosion screening and fabrication qualification.

Ti-6Al-4V ELI selection by product specification, form, metallurgical condition and finished-part requirements.

Selecting Ti-6Al-4V by product form, condition and manufacturing route, with bounded properties and fabrication guidance.

Selecting flake-graphite iron by casting grade, section and test basis, with bounded continuous-cast bar properties and machining-stock guidance.

Pure molybdenum mill products: grade and condition, atmosphere-dependent service, physical-property estimates and fabrication limits.

Commercially pure wrought nickel: designation, condition-dependent properties, caustic-service boundaries and fabrication controls.

Selecting pure tungsten by product, condition and atmosphere, with distinctions from heavy alloys and carbide and bounded fabrication evidence.

Specifying zinc Alloy 3 by ingot/casting requirements, with bounded typical properties, aging and creep considerations and finished-part acceptance.

Zinc-aluminum-copper-magnesium die-casting alloy: chemistry basis, test-bar properties, aging, creep and finished-part qualification.