Producer products
Manufacturing reference articles in Producer products.
- MIC-6 cast aluminum tooling plate
Producer-associated MIC6 plate identity, published stock tolerances and typical properties, with limits for machining, finishing and fixture qualification.
- Outokumpu Core 304/4301
Producer-specific identification, form-dependent properties and fabrication limits for Core 304/4301.
- Outokumpu Supra 316L/4404
Producer-specific selection of low-carbon CrNiMo stainless steel, with product-form strength data, corrosion boundaries and fabrication requirements.
- SSAB Domex Tube 355J2H
Product-specific selection of SSAB's cold-formed structural hollow sections, including thickness-dependent strength, impact-test scope and fabrication boundaries.
- SSAB Domex Tube 460MH
Product-specific selection of cold-formed structural hollow sections, including test conditions, section availability and fabrication/design boundaries.
- SSAB Domex Tube 500MH
Selecting and fabricating the SSAB hollow-section product with its mechanical-test and design-scope limits intact.
- SSAB Hardox 400
Selecting SSAB's wear steel by product form, hardness-test scope and fabrication requirements, including the thin-sheet exception.
- SSAB Hardox 450
Selecting Hardox 450 by supplied form and thickness, with thin-sheet acceptance, hardness limits and qualified fabrication requirements.
- SSAB Hardox 500 Tuf
Product-specific hardness, toughness and fabrication boundaries for Hardox 500 Tuf sheet and plate, including bending and welding examples.
- SSAB Hardox 500
Thickness-dependent hardness, typical properties and fabrication limits for the SSAB wear-steel product.
- SSAB Strenx 700 E
Specifying quenched-and-tempered structural plate with thickness-dependent strength, transverse toughness and qualified bending/welding requirements.
- SSAB Strenx 700MC
Selecting Strenx 700MC D/E sheet with thickness-dependent strength exceptions, toughness variants and qualified bending and welding requirements.
- SSAB Strenx Tube 700MLH
Product identity, mechanical-property conditions and fabrication limits for SSAB's thermomechanically rolled high-strength structural hollow sections.
- SSAB Strenx Tube 900MH
Product identity, test requirements and fabrication boundaries for the high-strength SSAB hollow section.
- SSAB Strenx Tube 960MH
Product-specific mechanical tests, section availability, welding-temperature controls and galvanizing limits for the cold-formed structural tube.