# Producer products

Manufacturing reference articles in Producer products.

[Manufacturing Wiki](https://planar.so/wiki/index.md)

- [MIC-6 cast aluminum tooling plate](https://planar.so/wiki/materials/producer-products/mic-6-cast-aluminum-tooling-plate.md): Producer-associated MIC6 plate identity, published stock tolerances and typical properties, with limits for machining, finishing and fixture qualification.
- [Outokumpu Core 304/4301](https://planar.so/wiki/materials/producer-products/outokumpu-core-304-4301.md): Producer-specific identification, form-dependent properties and fabrication limits for Core 304/4301.
- [Outokumpu Supra 316L/4404](https://planar.so/wiki/materials/producer-products/outokumpu-supra-316l-4404.md): Producer-specific selection of low-carbon CrNiMo stainless steel, with product-form strength data, corrosion boundaries and fabrication requirements.
- [SSAB Domex Tube 355J2H](https://planar.so/wiki/materials/producer-products/ssab-domex-tube-355j2h.md): Product-specific selection of SSAB's cold-formed structural hollow sections, including thickness-dependent strength, impact-test scope and fabrication boundaries.
- [SSAB Domex Tube 460MH](https://planar.so/wiki/materials/producer-products/ssab-domex-tube-460mh.md): Product-specific selection of cold-formed structural hollow sections, including test conditions, section availability and fabrication/design boundaries.
- [SSAB Domex Tube 500MH](https://planar.so/wiki/materials/producer-products/ssab-domex-tube-500mh.md): Selecting and fabricating the SSAB hollow-section product with its mechanical-test and design-scope limits intact.
- [SSAB Hardox 400](https://planar.so/wiki/materials/producer-products/ssab-hardox-400.md): Selecting SSAB's wear steel by product form, hardness-test scope and fabrication requirements, including the thin-sheet exception.
- [SSAB Hardox 450](https://planar.so/wiki/materials/producer-products/ssab-hardox-450.md): Selecting Hardox 450 by supplied form and thickness, with thin-sheet acceptance, hardness limits and qualified fabrication requirements.
- [SSAB Hardox 500 Tuf](https://planar.so/wiki/materials/producer-products/ssab-hardox-500-tuf.md): Product-specific hardness, toughness and fabrication boundaries for Hardox 500 Tuf sheet and plate, including bending and welding examples.
- [SSAB Hardox 500](https://planar.so/wiki/materials/producer-products/ssab-hardox-500.md): Thickness-dependent hardness, typical properties and fabrication limits for the SSAB wear-steel product.
- [SSAB Strenx 700 E](https://planar.so/wiki/materials/producer-products/ssab-strenx-700-e.md): Specifying quenched-and-tempered structural plate with thickness-dependent strength, transverse toughness and qualified bending/welding requirements.
- [SSAB Strenx 700MC](https://planar.so/wiki/materials/producer-products/ssab-strenx-700mc.md): Selecting Strenx 700MC D/E sheet with thickness-dependent strength exceptions, toughness variants and qualified bending and welding requirements.
- [SSAB Strenx Tube 700MLH](https://planar.so/wiki/materials/producer-products/ssab-strenx-tube-700mlh.md): Product identity, mechanical-property conditions and fabrication limits for SSAB's thermomechanically rolled high-strength structural hollow sections.
- [SSAB Strenx Tube 900MH](https://planar.so/wiki/materials/producer-products/ssab-strenx-tube-900mh.md): Product identity, test requirements and fabrication boundaries for the high-strength SSAB hollow section.
- [SSAB Strenx Tube 960MH](https://planar.so/wiki/materials/producer-products/ssab-strenx-tube-960mh.md): Product-specific mechanical tests, section availability, welding-temperature controls and galvanizing limits for the cold-formed structural tube.